مقاله Analysis of the Forced Nonlinear Vibration Behavior of a Cantilever Beam with a Fatigue Crack Using the Lindstedt- Poincarè Method

توجه : به همراه فایل word این محصول فایل پاورپوینت (PowerPoint) و اسلاید های آن به صورت هدیه ارائه خواهد شد

  مقاله Analysis of the Forced Nonlinear Vibration Behavior of a Cantilever Beam with a Fatigue Crack Using the Lindstedt- Poincarè Method دارای ۸ صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Analysis of the Forced Nonlinear Vibration Behavior of a Cantilever Beam with a Fatigue Crack Using the Lindstedt- Poincarè Method  کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه  و مراکز دولتی می باشد.

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Analysis of the Forced Nonlinear Vibration Behavior of a Cantilever Beam with a Fatigue Crack Using the Lindstedt- Poincarè Method،به هیچ وجه بهم ریختگی وجود ندارد

بخشی از متن مقاله Analysis of the Forced Nonlinear Vibration Behavior of a Cantilever Beam with a Fatigue Crack Using the Lindstedt- Poincarè Method :

تعداد صفحات:۸

چکیده:

In this paper, the nonlinear vibration behavior of a cantilever beam with a Fatigue Crack under harmonic excitation is investigated from an analytical point of view using one of the Perturbation Method’s named Lindstedt Poincarè Method. To this end, first the lateral vibration of the cracked beam in its first vibration mode is modeled as a SDOF system with an equivalent mass and stiffness. Then by introducing a new model for the bilinear stiffness of the beam with a breathing crack, the governing differential equation of motion is converted to the standard form that can be analyzed by Lindstedt- Poincarè method. The results show that the response is composed of two parts. The main part is the response of a system with the mean equivalent stiffness of the systems corresponding to the closed crack and the open crack cases which is referred as to corresponding linear system. The second part is composed of the first and the second order correction terms, which reflects the effect of system nonlinearity due to opening and closing the crack on the vibration response. In fact, the correction terms consist of the super harmonic components of the response. Thus in this work an analytical relation is established between super harmonic components of the dynamic response and the system characteristics and the crack parameters. Results have been validated by a numerical method and experimental results of literature.