Microstrutural assessment and mechanical performance of AL-6% Mg-X%Ca alloy in as-cast condition

توجه : به همراه فایل word این محصول فایل پاورپوینت (PowerPoint) و اسلاید های آن به صورت هدیه ارائه خواهد شد

 Microstrutural assessment and mechanical performance of AL-6% Mg-X%Ca alloy in as-cast condition دارای ۸ صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد Microstrutural assessment and mechanical performance of AL-6% Mg-X%Ca alloy in as-cast condition  کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه  و مراکز دولتی می باشد.

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی Microstrutural assessment and mechanical performance of AL-6% Mg-X%Ca alloy in as-cast condition،به هیچ وجه بهم ریختگی وجود ندارد

بخشی از متن Microstrutural assessment and mechanical performance of AL-6% Mg-X%Ca alloy in as-cast condition :

تعداد صفحات :۸

چکیده مقاله:

This study was undertaken to investigate the effect of different amount of calcium (0.01, 0.03, 0.05, 0.1, 0.3, 0.5, 1, 3, and 5 weight percent of calcium) on the microstructure and mechanical properties of Al-6%Mg alloy in as-cast condition. In current work, microstructural assessment was carried out by optical and scanning electron microscopy and also the change of mechanical properties was investigated by tensile tests. By increasing the calcium content, the ultimate tensile strength (UTS) of Al-6%Mg base alloy increases from 244 MPa to 293 MPa. And also the results showed that, increasing the calcium contents enhances the hardness values of the base alloy. Since the maximum solubility of calcium in aluminium alloys is very low, most of the calcium concentrations precipitated in the form of calcium-rich intermetallic compound such as CaAl2, which is greatly brittle and excessive presence of calcium contents lead to decrement in tensile properties.