مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves


در حال بارگذاری
23 اکتبر 2022
فایل ورد و پاورپوینت
2120
2 بازدید
۷۹,۷۰۰ تومان
خرید

توجه : به همراه فایل word این محصول فایل پاورپوینت (PowerPoint) و اسلاید های آن به صورت هدیه ارائه خواهد شد

 مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves دارای ۲۴ صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves  کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه  و مراکز دولتی می باشد.

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves،به هیچ وجه بهم ریختگی وجود ندارد


بخشی از متن مقاله Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilinear ranges of interaction curves :

سال انتشار : ۲۰۱۴

تعداد صفحات :۲۴

Nonlinear nite element analysis of RC beams under combined shear and torsion to extract linear and curvilineThe use of non-linear nite elements to assess the e ect of transverse reinforcement amount on the shape of shear-torsion interaction curve for RC beams is addressed. At rst, FEM results for specimens under pure torsion and combined shear and torsion were validated with previous outcomes. Secondly, reference specimens were made with the minimum required transverse reinforcement at rst. Each specimen was analyzed with the nite element method and tested under similar conditions in the laboratory, and the results, including the cracking pattern, cracking and ultimate loads, and shear-torsion interaction curves, were found to be in very good agreement. Finally, the transverse reinforcement amount was increased to certain extents and similar results were determined. FEM interaction curve stood below the experimental curve. It was also deduced that, from a certain increase in the transverse reinforcement, the shear-torsion interaction curve transforms from linear to elliptical.ar ranges of interaction curves

  راهنمای خرید:
  • در صورتی که به هر دلیلی موفق به دانلود فایل مورد نظر نشدید با ما تماس بگیرید.